Journal of Advanced Ceramics (May 2025)

A potential thermophotovoltaic emitter Er(Ta1−xNbx)O4 (0 ≤ x ≤ 0.2) with excellent selective emission performance

  • Mengtong Ma,
  • Minzhong Huang,
  • Liyan Xue,
  • Kaixian Wang,
  • Ting Zhou,
  • Huimin Xiang,
  • Canglong Wang,
  • Fan Yang,
  • Yiqun Deng,
  • Heng Chen

DOI
https://doi.org/10.26599/JAC.2025.9221072
Journal volume & issue
Vol. 14, no. 5
p. 9221072

Abstract

Read online

Selective emitters are crucial as the key component determining the energy conversion efficiency of radioisotope thermophotovoltaic (RTPV) systems. Developing selective emitter materials with high selective emissivity, high spectral efficiency and excellent high-temperature stability can effectively improve the energy conversion efficiency and service life of RTPV systems. To adjust the selective emissivity and spectral efficiency, a series of rare earth tantalate selective emitters (Er(Ta1−xNbx)O4 (0 ≤ x ≤ 0.2)) matching GaSb batteries were prepared by high-temperature solid-state reaction and pressureless sintering method. The as-prepared Er(Ta1−xNbx)O4 (0 ≤ x ≤ 0.2) ceramics exhibit high emissivity (49%–93%) in the selective band (1.40–1.60 μm), high spectral efficiency (59.46%–62.12%) and excellent high-temperature stability at 1400 °C. On one hand, doping Nb5+ into the B-site changes the crystal local structure symmetry around Er3+, which promotes the f–f transition of Er3+ and enhances the selective emission performance. On the other hand, doping Nb5+ ions into the B-site can alter the bandgap and oxygen vacancy concentration to suppress non-selective emissivity. Increasing the selective emissivity and reducing the non-selective emissivity is beneficial for improving the spectral efficiency of selective emitters. Hence, the selective emissivity and spectral efficiency of Er(Ta1−xNbx)O4 (0 ≤ x ≤ 0.2) can be effectively enhanced through compositional design, providing a new strategy for developing selective emitter materials for RTPV applications.

Keywords